Eric Garay

Have you ever second guessed the RAM you’ve chosen or have wondered if you should’ve bought the faster, more expensive stuff? If so, you’re not alone. We’ve all done it. But, with a little research, you can save yourself some money and make the right choice. Let me show you what I’m talking about.

I recently received some Corsair Dominator 1600MHz DDR3 Dual Channel memory. This kit operates at 1600MHz at stock 8-8-8-24 memory timings requiring only 1.65 Volts. It’s some of the newest memory that’s compatible with motherboards using the new Intel P55 Chipset. You can find the memory on Newegg for roughly $129, or so.

Corsair offers a faster sibling dubbed the Dominator GT 1600MHz which operates at 7-7-7-21 memory timings also requiring 1.65 Volts. The difference here is the memory timings. The lower timings mean extra performance. But, this memory also costs about $164.99 due to the better ICs used to build the modules.

Since, I have a good quality GIGABYTE GA-P55-UD5 motherboard on hand, I was able to get the Dominator CAS8 kit to run CAS7 without any issues. All I had to do was enter the BIOS (by pressing the DEL key during initial boot) and find the memory options. Upon finding the timings for Memory Bank 1 and 2, I manually changed the first three timings from 8 to 7 and the TRAS from 24 to 21.

Some less sturdy motherboards might require extra Memory Voltage, but the P55-UD5 didn’t need it. The Memory Voltage was left to Auto in the BIOS which has run perfect now for over a week. It even passed MemTest which is pretty useful for detecting any memory errors that are associated with weak memory or bad timings.

If you’re planning on a computer build right now, or are going to order one, make sure you get a good quality motherboard. Chances are that the performance memory you’re buying will offer very similar results. And, all you had to do was change a few settings without shelling out extra money to get the same performance as the elite grade memory.

Koolance actually calls it an LN2 Liquid Nitrogen Evaporator. You may have seen it on their home page among some of the other product launch announcements. It comes on the heels of the recent GIGABYTE Overclocking Championship in LA last month where the participants use LN2 to super cool Quad core processors that are overclocked in hopes of setting some new world benchmark records. And if nothing else, you beat out everyone else who’s competing as well.

The pot is made from a copper core with nickle plating. Covering the copper this way keeps the pot looking good by avoiding oxidization (tarnished look) which is a common issue with the copper and brass pots around. The hope here is that having a copper core will still match or surpass performance. That’s going to be the important note since the home made “F1″ copper pot is the pinnacle of performance.

As with any pot, it actually sits on top of the CPU and is held down by a series of extra long screws. A nylon mounting bracket secures the pot from above while a back plate secures from the bottom of the motherboard. In an ideal installation, you’ll need to ‘water proof’ your motherboard from condensation build up on the outside of the pot as the LN2 evaporates. Koolance informed me that the water proofing supplies are already in the works and will arrive soon.

I’ll hopefully have one of these bad boys in my possession for some bench time soon. Since we all can’t afford a $300+ custom made F1 for some elite cooling, perhaps this will fill in that gap. I doubt it was intended to measure up to custom made pots, but it should cool well enough to promote some record setting attempts. When I get my hands on one, I’m sure it’ll be posted up on Futurelooks.com in greater detail.